Setup | Presetting without a 3D touch probe
5.6
Presetting without a 3D touch probe
Note
When presetting, you set the control display to the coordinates of a
known workpiece position.
All manual probe functions are available with a 3-D touch
probe.
Further information: "Presetting with a 3-D touch probe
(option number 17)", Page 230
Refer to your machine manual.
The machine tool builder can disable presetting in
individual axes.
Preparation
Clamp and align the workpiece
Insert the zero tool with known radius into the spindle
Ensure that the control is showing the actual positions
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
5
201