Importing Tool Tables - HEIDENHAIN TNC 620 User Manual

Tools | Tool data
Soft key Editing functions of the tool table
Go to end of line
Copy active field
Insert copied field
Add the entered number of lines (tools) at the end
of the table
Insert a line with definable tool number
Delete the current line (tool)
Sort the tools according to the content of a selec-
table column
Select possible entries from a pop-up window
Reset the value
Place the cursor in the current cell

Importing tool tables

Refer to your machine manual.
The machine tool builder can adapt the
ADAPT NC PGM / TABLE function.
The machine tool builder can define update rules that
make it possible, for example, to automatically remove
umlauts from tables and NC programs.
If you export a tool table from an iTNC 530 and import it into a
TNC 620, you have to adapt its format and contents before you can
use the tool table. On the TNC 620, you can adapt the tool table
conveniently with the ADAPT NC PGM / TABLE function. The control
converts the contents of the imported tool table to a format valid for
the TNC 620 and saves the changes to the selected file.
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
4
139