Tools | Tool data
Pocket table for tool changer
Refer to your machine manual.
The machine tool builder adapts the features of the
pocket table to the requirements of your machine.
You need a pocket table for automatic tool changing. You manage
the assignment of your tool changer in the pocket table. The pocket
table is in the TNC:\table directory. The machine manufacturer
can amend the name, path, and content of the pocket table. If you
wish, you can select different views using the soft keys in the TABLE
FILTER menu.
Editing a pocket table in a Program Run operating mode
Select the tool table: Press the TOOL TABLE soft
key
Press the POCKET TABLE soft key
If required, set the EDIT soft key to ON
HEIDENHAIN | TNC 620 | User's Manual for Setup, Testing and Running NC Programs | 01/2022
4
141