Vatech Smart Plus PHT-35LHS Technical Manual page 105

7) Set the parameters as shown below and click CONFIRM.
8) Click READY when enabled and acquire the image according to the Console Software
guidance and save the image in a 2D Viewer (EzDent-I or EasyDent 4).
9) Run EzEval.exe and click the CT Image Evaluation tab.
10) Click brw, browse a captured slice image and open it.
VT-TECH-Smart Plus-001
EzEval.exe path: C:\VCaptureSW\Util\EzEval_Phantom
Slice image path: C:\VCaptureSW\Acquisition\CBCT\WidePano\SLICE
103 / 188
Smart Plus (PHT-35LHS)
Technical Manual
COPYRIGHT© 2018 VATECH
.
ALL RIGHTS RESERVED