Radioactive Warning; Pre-Check Points For Service Technician - Vatech Smart Plus PHT-35LHS Technical Manual

4. Radioactive Warning

It is essential to read this manual carefully and strictly abide by all warnings and cautions stated. Since
rules and regulations concerning radiation safety differ by country, it is the users' responsibility to
comply with all applicable rules and regulations concerning radiation safety and protection in their
area.
Radiation Safety Cautions

5. Pre-check points for Service Technician

Following checkpoints must be confirmed before performing the next procedure.
NO.
1 Do the equipment power, and PC condition work fine?
2 Is the power off before the equipment repair begins?
Is the voltage range indicated back to the equipment appropriately
3
observed?
4 Does the ground Is equipment grounding connection working fine?
Are there any unnecessary accessories that can affect X-ray exposure
5
conditions?
Are at least two operators present to start operation with enough
6
understanding of the equipment?
7 Are all required tools ready?
VT-TECH-Smart Plus-001
This equipment must be housed inside a radiology room (X-ray room).

Use a shielding plate or other measures to protect you (the operator)

and patients from radiation exposures when the X-ray system is in
operation.
Only certified engineers who understand the danger of radiation

exposure and related regulations can operate this equipment.
Press the emergency stop button to stop the operation when the

equipment shows errors or malfunction during the image capturing.
Have patients wear a lead apron with a collar to protect the thyroid from

X-ray exposure.
The only patient can remain in the shielding room during image

capturing. Do not enter the X-ray exposing area without protection.
Children and pregnant women must consult with a doctor before X-ray

imaging.
Check Point
8 / 188
Smart Plus (PHT-35LHS)
Technical Manual
Pass Fail
□ □
□ □
□ □
□ □
□ □
□ □
□ □
COPYRIGHT© 2018 VATECH
.
ALL RIGHTS RESERVED