4. Installation Procedures
4.6
Assembling Covers
Assemble the cover on the rear side of the Handle Frame by tightening two
screws.
38
After assembling covers by tightening screws, cover the holes
with silicon caps.
Part No.: 27
Truss Screw
Size: M4 x 8
Qty.: 2 ea
Figure 4-23. Assembling the cover on the Handle Frame
The USB cable from the Handle Frame should be inserted into
the bottom of the column and pulled out to the rear, making
sure that the cable is not visible outside. Otherwise, the
operation on the next page cannot be performed.
Green21 (Model: PCT-90LH) Installation Manual