Disassembly Of Vatech A9(Pht-30Css) Covers; Vertical Frame Part - Vatech A9 Technical Manual

4. Disassembly of vatech A9(PHT-30CSS) Covers

4.1. Vertical Frame Part

4.1.1. DISASSEMBLY OF THE VERTICAL UPPER COVER
1. Loosen all bolt caps and bolts on the VERTICAL UPPER COVER.
By doing this, you can access
- Ethernet Grabber
- Main MCU BOARD (MCU028)
- Power Board
- Noise Filter
VDH-TeM-098
• The truss head screws on the cases of equipment are covered with
rubber caps. Remove the rubber caps before unscrewing the truss head
screws.
• In this manual, the procedures for removing the rubber caps are omitted
for convenience.
• The following illustrations may look different from actual products
depending on the options.
34 / 214
Vatech A9 (PHT-30CSS)
Technical manual
COPYRIGHT© 2020 VATECH
.
ALL RIGHTS RESERVED