Vatech Green 21 PCT-90LH User Manual page 109

Finalizing the Parameters Settings
1. Click on Exit  Close and terminate the control panel.
2. Make sure to exit the imaging program (main GUI).
3. Reset the equipment to apply the changes.
4. Setting Up the IP Address for the LCD
For the LCD to communicate with the PC, the proper IP address should be set on
the PC. The following screenshots are taken in the Windows 7.
5. From the desktop, right-click on the Network icon and click on Properties.
6. Select "Change adapter settings".
7. Double-click on the Local Area Connection.
8. From the following figure, select the Internet Protocol Version 4 and click on
Properties.
9. To set the new IP address, enter the IP address '192.168.33.87', and click on OK.
10. Reset the PC and the equipment.
Green21 (Model: PCT-90LH) Installation Manual
Figure 7-39. Network Properties
Figure 7-40. Internet Protocol Version 4
7. Installing Software
97