Vatech Green 21 PCT-90LH User Manual page 35

5. Tighten six wrench bolts and two wrench bolts to attach the Base Unit as shown
below.
Wrench Bolt
Green21 (Model: PCT-90LH) Installation Manual
Hold the Base Unit to keep it from falling.
The rear cable may be pushed when assembling the base
unit. Use a cable tie at the rear to tie it up, and work around
the cable to prevent it from being pushed.
When connecting the base unit, the base unit may hang on the
bundled cable exposed in the column. Make sure that use a
cable tie.
Part No.: 24
Size: M10 x 60
Qty.: 2 EA
Part No.: 25
w/spring and flat
washer
Size: M10 x 40
Qty.: 6 EA
4. Installation Procedures
23