Introducing The Ezscan; Introduction; Indications Supported; Certification And Compliance - Vatech EzScan-i User Manual

Introducing the EzScan

1.1 Introduction

Thank you for purchasing the EzScan solution from Vatech. The EzScan
solution is designed and developed to produce high-quality digital
intraoral scans or models, for dental restoration or analysis.
The EzScan solution is designed with you as a dentist and your patient in
mind. The scanner is lightweight, small and easy to use, enabling fast,
accurate scanning and great patient experience. The Case management
application provides efficient and customizable order management, for
easy and intuitive use. Enjoy your new intraoral scanner solution!

1.2 Indications supported

The data sets from the EzScan can be used for the following indications.
· Conventional crowns
· Anatomic crowns
· Copings
· Provisional crowns
· Anatomical pontics
· Reduced pontics
· Provisional pontics
· Inlays/Onlays
· Implant abutments
* Verify with your dental lab or service provider about their capabilities
to produce particular indications.

1.3 Certification and compliance

The system has been tested and conforms to the following standards:
• IEC 60601-1, Medical electrical equipment - Part 1: General
requirements for basic safety and essential performance
• IEC 60601-1-2, Medical electrical equipment - Part 1-2: General
requirements for basic safety and essential performance - Collateral
Standard: Electromagnetic disturbances
- Requirements and tests:
• IEC 62471, Photobiological safety of lamps and lamp systems
· 3-unit implant bridges
· Up to 5-unit bridges
· Orthodontic aligners
· Nightguards
· Splints
· Retainers
· Bleach trays
· Sleep appliances
· ...
Page 5