Christie HS Series Installation And Setup Manual page 8

The following table lists the hazard distance for the Christie projector lens with the zoom adjusted
to its most hazardous position.
US and International hazard distances based upon IEC 62471-5:2015, Photobiological safety of
lamps and lamp systems – Part 5: Image projectors:
Projection lens
0.38:1 Ultra short throw lens
0.65-0.75:1 Zoom lens
0.84-1.02:1 Zoom lens
1.02-1.36:1 Zoom lens
1.2-1.5:1 Zoom lens
1.5-2.0:1 Zoom lens
2.0-4.0:1 Zoom lens
4.0-7.2:1 Zoom lens
7.2-10.8:1 Zoom lens
For installations in the United States
The following must be in place for laser-illuminated projector installations in the United States:
• Any human access to the hazard zone, if applicable, must be restricted by barriers to enforce
the no access zone.
• Permanent show installations containing Risk Group 3 laser-illuminated projectors must meet
the following conditions:
• Installed by Christie or by Christie-authorized and trained installers. Refer to the
XTERNAL - Laser safety awareness training
(Course code: CS-ELSA-01) on the http://www.christieuniversity.com site.
• Performed according to instructions provided by Christie.
• Ensure the projection system is securely mounted or immobilized to prevent unintended
movement or misalignment of the projections.
• Temporary show installations containing Risk Group 3 laser-illuminated projectors may be
installed by Christie or sold or leased only to valid laser light show variance holders (laser light
show manufacturers) for image projection applications. Such manufacturers may currently hold
a valid variance for production of Class IIIb and IV laser light shows and/or for incorporation of
the Risk Group 3 laser-illuminated projectors into their shows. This requirement applies also to
dealers and distributors of these laser-illuminated projectors.
• The Christie Laser Projection System Installation Checklist must be fully completed after the
installation and sent to lasercompliance@christiedigital.com. A copy can remain on-site. This
checklist can be found as a separate document in the accessory box with the manual.
• Certain US states have additional laser regulatory requirements. Go to www.christiedigital.com
for further information.
HS series 2K Installation and Setup Guide
020-002038-01 Rev. 1 (09-2022)
Copyright ©2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Part number
140-142108-XX
140-144100-XX
140-114107-XX
140-115108-XX
140-109101-XX
140-110103-XX
140-111104-XX
140-116109-XX
140-145101-XX
Introduction
Hazard distance (m)
N/A
N/A
N/A
N/A
N/A
1.2
2.3
4.7
9.7
8