Connecting To Video Equipment - Christie HS Series Installation And Setup Manual

Connecting to video equipment

Learn what cable/connectors may be used to connect to various video sources.
Component video output
equipment
ID Connector name
1 HDMI cable
2 HDMI cable
• After connecting the projector to an input device, the projector automatically detects the input
source. You can also select an input source by pressing
• Due to the difference in applications for each country, the accessories required in some regions
may differ from those shown.
• The diagrams are for illustrative purposes only and do not indicate these accessories are supplied
with the projector.
HS series 2K Installation and Setup Guide
020-002038-01 Rev. 1 (09-2022)
Copyright ©2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
DVD player Video cassette recorder
1 2 3
DISPLAY PORT
HDBaseT
3G-SDI IN 3G-SDI OUT
USB
ETHERNET
RS232 IN
HDMI OUT
HDMI-1
REMOTE IN REMOTE OUT DC OUT
3D SYNC 3D SYNC
12V@300mA
IN OUT
ID
3
Connector name
DisplayPort cable
.
INPUT
Connecting to devices
37