Projector Components; Front View; Rear View - Christie HS Series Installation And Setup Manual

Projector components

Identify the main components of the projector.

Front view

Identify the main components on the front of the projector.
ID Part name
1 Front IR sensors
2 Projection lens
3 Adjustable feet

Rear view

Identify the main components on the rear of the projector.
3
ID Part name
1 Rear IR sensor
2 Input/Output (I/O) panel
HS series 2K Installation and Setup Guide
020-002038-01 Rev. 1 (09-2022)
Copyright ©2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Description
Receives signals from the IR remote keypad. Keep the signal path to the
sensor unobstructed for uninterrupted communication with the projector.
Allows automated lens control and adjustment: vertical and horizontal
offsets, zoom, and focus.
Raises or lowers the feet to level the projector.
DISPLAY PORT
HDBaseT
3G-SDI IN 3G-SDI OUT
USB
ETHERNET
RS232 IN
HDMI OUT
HDMI-1
REMOTE IN REMOTE OUT DC OUT
3D SYNC 3D SYNC
12V@300mA
IN OUT
Description
Receives signals from the IR remote keypad. Keep the signal path
unobstructed for uninterrupted communication with the projector.
Connects the projector to external devices.
Installation and setup
1
2
3
1
2
16