Table of Contents
Advertisement
GNSS Status
This area displays the GNSS engine solution type in text form, available messages include:
• 2D/3D FIX: Standalone using GPS/GAL/GLO or BDS only.
• DGNSS: GPS/GAL/GLO or BDS with differential corrections.
• RTK Float: RTK but not full resolution.
• RTK Fixed: Fixed RTK.
If the unit is not receiving valid satellite signals, it will display a 'NO FIX' message.
RTK Age
This area displays the RTK signal age in seconds received from the NTRIP server. If there is a loss in connection to the
NTRIP server, then the RTK age will increase (up to a maximum of 60 seconds), the byte count will stop and eventually
a message will say 'Connect Failed NTRIP Caster'.
After a loss of 60 seconds, the RTK age will disappear from the display. If connection to the NTRIP is reestablished, the
RTK age will not reappear and will take a power cycle of the unit to ensure that RTK age is displayed again.
Data Received
This area displays the number of correction data bytes received from the NTRIP server.
Number of Sats
This will display the total number of satellites being tracked. A full breakdown of the satellite constellations can be seen
on the
Sats
Screen.
Logging Status
This area displays the logging status of the unit. If the unit is logging to the SD card, 'Logging' will be displayed. If the
unit is not logging to the SD card, for example no movement is detected (if logging mode is set to 'Only when Moving'
within the VBO Log Settings area of the Wi-Fi hotspot) or the logging has been stopped using the square button on the
front of the unit, 'Log Stopped' will be displayed.
If no SD card is detected by the unit, 'No SD Card' will be displayed.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/VBOX_Sigma_User_Guide/05_-
_VBOX_Sigma_Display
27
Advertisement
Table of Contents
