Logging Status - Racelogic Performance Box Touch V1 Manual

LEDs
The Performance Box Touch has 4 LEDs above the display. These can flash in different colour and different frequency
patterns depending on the process being performed. You can learn more about the LED behaviour on the Performance
Box Touch here.

Logging Status

The red Record Icon will show when the unit is logging
data to the SD card.
If the icon appears white when you have initiated
logging, the unit is primed for logging and is in the
process of synchronising the internal real-time clock
(RTC) to GPS time. The logging will not start until
this synchronisation process is complete.
IMPORTANT –
The SD card shouldn't be removed when the Record Icon is on as you may lose data.
SD Status
The SD Card Icon displays the status of the recording
media. When an SD card has been inserted and has
free space, it will display as green. Tapping on the icon
when green will manually start or stop logging
data, overriding the Configured Logging
When no SD card is detected or the media is full, the
icon will display as red.
Satellite Status
The Satellite Icon displays whether the unit has a valid
satellite lock.
When a lock is acquired, it will display as solid green.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/Performance_Box_Touch/Performance_Box_Touch_V1/
User_Guide_%E2%80%93_Performance_Box_Touch_V1/03_Screen_Layout_%E2%80%93_Performance_Box_Touch_V1
Strategy.
2