Racelogic VBOX Sigma User Manual page 20

Hide thumbs Also See for VBOX Sigma:

Table of Contents

04 - VBOX Sigma Configuration

Configuration of VBOX Sigma is performed using a Wi-Fi hotspot created by the unit. The hotspot name and IP address

is displayed on the

Network Screen

of the unit when powered, accessed by using the

Up or Down Arrow Buttons

the front of the unit.

Using a phone or a computer, navigate to the Wi-Fi settings on the device and connect to the hotspot name (RL-212101

in the example below). Open an internet browser and enter the IP address (10.10.10.1 in the example below) within the

address bar.

The VBOX Sigma setup page is then displayed, which includes the GNSS engine status, Wi-Fi, modem, NTRIP caster

settings, CAN, VBO log and status information. The serial number and firmware version of the unit is displayed on the

bottom right of the page.

https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/VBOX_Sigma_User_Guide/04_-

_VBOX_Sigma_Configuration

Table of Contents

Rlvbsigma