Table of Contents
Advertisement
How to Update the VBOX Sigma Firmware
As more features are added in the future, it is recommended to check the website periodically for updates. To upgrade
the VBOX Sigma firmware, download the following from the VBOX Automotive website:
•
Latest VBOX Sigma Firmware File (.upgrade extension file)
•
VBOX Sigma USB Driver
•
Racelogic Upgrader Software
Update Procedure
1. Connect the VBOX Sigma to a PC via USB using the supplied cable TTV1AM20MB31 to the USB connector on
the
top of the
unit.
2. If you are not also powering the unit via the 3-way hirose connector on the
supplied RLCAB010H cable, a 'USB power may not be adequate' message will be displayed as the power
requirements of the unit for full functionality are not being met from the PC. Just press any button to restart the unit
and carry on with the upgrade as usual.
3. Double click on the .upgrade update file, which auto runs the Upgrader Software. The firmware file will
automatically load on to the unit, there is no need to select a COM port or select 'Upgrade' within the Software.
Note: Ensure that the VBOX Sigma USB Driver is installed or else the unit will not be detected.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/VBOX_Sigma_Updates/
bottom of the unit
using the
How_to_Update_the_VBOX_Sigma_Firmware
50
Advertisement
Table of Contents
