Table of Contents
Advertisement
04 - PB Sport - Logging
Logging Control
Logging of data to the CF card can be controlled in two ways:
• Opening the CF card door; this triggers a micro switch that stops the logging and closes the file. Closing the door
will restart the logging to a new file.
• Pressing the '■'' button, this will stop the logging and close the current file. Pressing the '■'' button again will then
re-start the logging to a new file.
• If set to 'Always create a new file' in the setup software, the file will be closed and a new one opened when the unit
is power cycled.
Logging Modes
The PerformanceBox Sport supports two logging modes that are set using the PerformanceBox Sport Setup software:
• Log continuosly.
• Log only when moving (speed >0.5km/h).
Logging Rates
The PerformanceBox Sport has an adjustable log rate set within the PerformanceBox Sport setup software. This allows
the log rate to be set in the range between 1 sample per minute and 10 samples per second (10Hz).
https://en.racelogic.support//Product_Info/Legacy_Products/PerformanceBox_Sport/PB_Sport_-_User_manual/04_-_PB_Sport_-
_Logging
10
Advertisement
Table of Contents
Need help?
Do you have a question about the PerformanceBox Sport and is the answer not in the manual?
Questions and answers