Page 1
After mounting the VBOX Sport, insert the SD card, and briefly press the power button to switch on. Wait for the satellite led to stop flashing, and then logging will start as soon as you start moving. Alternatively, you can select ‘record continuously’...
Page 2
Pairing with a second device VBOX Sport can only be connected to one iOS device at a time. If you wish to connect to a new device, first you need to remove the pairing on the previous iOS device by selecting the VBSport in the 'MY DEVICES' list and then select ‘Forget This Device’.
Page 3
Test menu indicates whether the VBOX Sport is connected to the device. Acceleration testing Once the app is installed and your VBOX Sport has been linked to your phone, wait for good satellite lock, and then https://en.racelogic.support//Product_Info/Performance_Meters/VBOX__Sport/Quick_Start_Guide/VBOX_Sport_-_Getting_started...
You can change the type of test using the ‘Setup’ button at the bottom of the screen. The Brake test starts as soon as the car starts to decelerate. Zero to Zero testing You can carry out a 0-100-0 or similar acceleration followed by braking, by using the 0 to 0 function. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX__Sport/Quick_Start_Guide/VBOX_Sport_-_Getting_started...
Page 5
This section is used to set define test ranges. Only one range can be set for Zero to Zero tests, but there is no limit on the number of Acceleration or Brake tests. Note that distance acceleration tests will calculate Mile, 1/2, 1/4 and 1/8 Mile results automatically. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX__Sport/Quick_Start_Guide/VBOX_Sport_-_Getting_started...
Page 6
Settings area. 3. Click on add a new device and select the VBOX Sport (this only needs to be done once, in the future, whenever the device is in range and the Bluetooth is on, connection will be made automatically).
Page 7
Software and navigate to the 'Home' tab, select the 'Online' button and choose the correct COM port for the VBOX Sport from the drop down menu. Once the software is connected to the VBOX Sport, the dashboard gauges will automatically start to display the data being sent live over the VBOX's serial stream.
Page 8
When in online mode, a newly-created session will be populated with session data from the previous session (if entered). Note: The COM port selection can be cancelled before the software has fully opened online communications. This is done by selecting the 'X' button at the bottom left of the software window, as shown below. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX__Sport/Quick_Start_Guide/VBOX_Sport_-_Getting_started...
Page 9
If the connection is lost, a 'Disconnected' message is displayed. To reconnect again, select the 'Try Reconnect' option. More information on viewing live data and performing tests using VBOX Test Suite can be found here. https://en.racelogic.support//Product_Info/Performance_Meters/VBOX__Sport/Quick_Start_Guide/VBOX_Sport_-_Getting_started...
Need help?
Do you have a question about the VBOX Sport and is the answer not in the manual?
Questions and answers