Table of Contents
Advertisement
Once the software is connected to VBOX Sigma, the dashboard gauges will automatically start to display the data being
sent live over the
VBOX's serial
Available channels available for live view include:
• Satellites: This is the number of satellites in use.
• Time: This is UTC time since midnight in the form HHMMSS.SS.
• Latitude: Latitude in minutes MMMM.MMMMMMMM +ve = North e.g. 3169.30644410M = 52D, 49M, 18.4S.
• Longitude: Longitude in minutes MMMMM.MMMMMMMM +ve = West e.g. 00040.18164742M = 00D, 40M, 10.9S.
• Velocity: Velocity in km/h.
• Heading: Heading in degrees with respect to North.
• Height: Height above sea level in meters based on the
• Solution type: Indicator for what the unit is currently using to derive position: 0 = No sats; 1 = Standalone
using GNSS only; 2 = SBAS; 3 = RTK Float (RTK but not full resolution); 4 = RTK Fixed.
In this Online mode, Start, Stop and Reset buttons will appear on the dashboard. These buttons are used to start, stop
and reset any open tests.
stream.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/VBOX_Sigma_User_Guide/06_-
WGS84
model of the earth used by VBOX GNSS engines.
_VBOX_Sigma_Data_Analysis_Software
32
Advertisement
Table of Contents
