Table of Contents
Advertisement
The VBOX Sigma GNSS engine can use the following signals:
• GPS L1/L2C
• Glonass L1OF, L2OF
• Galileo E1B/C, E5b
• Beidou B1I, B2I
Therefore it is important that the NTRIP service you use transmits all of these corrections.
The transmission of these correction signals at 1 Hz uses approximately 1 kB per second depending on how many
satellites are visible, so if you are intending to use a SIM card to connect to the NTRIP server, ensure that you have
enough data available.
Registration
So that Racelogic can continue to provide you with notification of the latest software releases, firmware upgrades and to
offer technical support, please register your VBOX Sigma.
Register your unit here.
Standard Inventory
Product Code
VBSIGMA-V1
RLACS308
TTV1AM20MB31
RLCAB010H
8 GB SD Ultima Pro UHS-1
Memory Card
ANTMSTUBSMAM
Quantity
1
1
1
1
1
1
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/VBOX_Sigma_User_Guide/01_-
Description
VBOX Sigma Unit
GNSS Antenna
USB-A to USB-C Fast Data/Power
Cable
Hirose 3 W Plug to Cigar Plug
Power Cable, 2 m
RLACS313
Multi Band Antenna
_VBOX_Sigma_Introduction
8
Advertisement
Table of Contents
Need help?
Do you have a question about the VBOX Sigma and is the answer not in the manual?
Questions and answers