Table of Contents
Advertisement
It is also possible to change the name and IP address of the access point within this menu. If changed, the
Network
Display Screen
will also be updated with the new access point details.
Modem
If configured, the Modem area displays the cellular access point name (APN) and connection status. If you are intending
to use the internal 4G modem, ensure that the data Standard SIM card is
correctly inserted within the unit
and
the SIM card has been activated. The easiest way to activate it is to put it into a USB 4G dongle and go through the
steps to activate it on a computer before you use it in the unit.
Press the 'Change settings' button next to the Modem heading and then use the presented screen to configure the
modem. Enter the APN, Username and Password (if required) associated with your network provider and then press the
'Save and restart' button. Once connected to the network provider, the unit will briefly display a 'Connected (mobile
data supplier)' message.
VBOX Sigma will then re-boot and attempt to connect to the internal modem you have just configured. The settings page
will be updated with the new settings and provide a connection status indication. The
Network Display Screen
will also
provide this information.
https://en.racelogic.support//Product_Info/VBOX_Data_Loggers/VBOX_Sigma/VBOX_Sigma_User_Guide/04_-
_VBOX_Sigma_Configuration
22
Advertisement
Table of Contents
