Toshiba E-STUDIO 2020AC Frequently Asked Questions Manual page 76

10.QUESTIONS FOR ERROR CODES
Error code
2D68 File Sharing service is not available
2D69 NetWare service is not available
2DA6 Failure to delete file
2DA7 Failure to acquire resource
2DC0 Job canceled
2DC1 Power failure
Store to USB
Error code
2E10, 2E12, Wrong job status
2E13
2E11 Not enough memory
2E14 Invalid parameter specified
2E15 Document size exceeded limit or
maximum size
2E30 Failure to create directory
2E31, 2E33 Failure to create file
2E32 Failure to delete file
76 Questions for Error Codes
Description
Description
Corrective action
Ask your administrator whether the SMB is enabled.
Ask your administrator whether the NetWare is enabled.
Delete the files in the shared folder from Explorer. Turn the
power OFF and then back ON and reattempt the job in
error. If the error still persists, contact your service
representative.
Turn the power OFF and then back ON and reattempt the
job in error. If the error still persists, contact your service
representative.
The job has been canceled by a user.
Check whether the power cable is connected properly and
is inserted securely. Then resend the job.
Corrective action
Turn the power OFF and then back ON and reattempt the
job in error. If the error still persists, contact your service
representative.
Wait for a while and reattempt the operation. If the error
still persists, turn the power OFF and then back ON. Then
reattempt the job in operation.
If a template is being used, create it again. If the error still
persists, turn the power OFF and then back ON. Then
reattempt the operation.
Divide the file into several ones or reattempt the job in a
single-page format.
Check that the access privilege to the storage directory is
writable and also that the disk in the directory has enough
space. Then reattempt the job in error.
If more than one job is performed simultaneously, the
error may occur because the storage device temporarily
runs out of space. I Wait for a while and reattempt the
operation. If the error still persists, turn the power OFF and
then back ON. Then reattempt the job in operation.
Check that the access privilege to the storage directory is
writable and also that the disk in the directory has enough
space. Then reattempt the job in error.
If more than one job is performed simultaneously, the
error may occur because the storage device temporarily
runs out of space. I Wait for a while and reattempt the
operation. If the error still persists, turn the power OFF and
then back ON. Then reattempt the job in operation.
Turn the power OFF and then back ON and reattempt the
job in error. If the error still persists, contact your service
representative.