Toner Near Empty. (***)" Is Displayed; Replace The Waste Toner Box" Is Displayed; Please Empty Hole Punch Waste" Is Displayed; This Original Is Copy Protected" Is Displayed - Toshiba E-STUDIO 2020AC Frequently Asked Questions Manual

9.QUESTIONS FOR ERROR MESSAGES
 "Toner near empty. (***)" is displayed.
Toner is running out. (For color models, "***" indicates the applicable color.) (The colors are shown abbreviated when
two or more toners are running out: Y: yellow, M: magenta, C: cyan, K: black)
Some toner is still left in the toner cartridge while this message is being displayed. You do not have to replace the
toner cartridge yet. Check the color of the toner on the touch panel and prepare the toner cartridge. (Depending on
the copying conditions, this message may not appear even when the toner cartridge is near empty.)
 Replace the toner cartridge after the toner has completely run out. "Install new *** toner cartridge" is displayed at
that time.
 Printing in the black mode is available even if the other colors have run out. Neither printing in the color nor black
mode can be done when the black toner has run out.
 Depending on the destination, this message may not be displayed on the screen.
 "Replace the waste toner box" is displayed.
The waste toner box is full. Replace the waste toner box following the guidance displayed on the touch panel.
 "Please empty hole punch waste" is displayed.
The dust bin of the Hole Punch Unit is full. Remove the paper punchings. For details, see the reference below:
Troubleshooting - TROUBLESHOOTING FOR THE HARDWARE - Cleaning the Hole Punch Dust Bin
 "This original is copy protected" is displayed.
An attempt is made to copy a prohibited original. This original cannot be copied.
 "DEPARTMENT Quota exceeded. Contact the administrator." is displayed.
The copying, printing or scanning quota to the department has reached "0". For details of setting the quota, ask your
administrator.
 "Check under the finisher tray and reboot the machine." is displayed.
An obstruction is placed under the tray of the Finisher. Remove the obstruction under the tray of the Finisher and
reboot the equipment.
 "Not enough Work Space to store originals Will you print out stored originals?" is
displayed.
The internal memory available ran out during scanning. To print out the data for the originals stored (scanned) until
the message appeared, press [Yes] on the touch panel. To delete the stored data, press [No].
 "User quota exceeded. Contact the administrator." is displayed.
The copying, printing or scanning quota to the user has reached "0". For details of setting the quota, ask your
administrator.
 "User and Department Quota exceeded. Contact the administrator." is displayed.
The copying, printing or scanning quota to the user has reached "0". For details of setting the quota, ask your
administrator.
 "The number of originals exceeds the limits. The scanned data will be deleted." is
displayed
The number of originals to be scanned has exceeded the limit of 1000 sheets during scanning. (When the magazine
sort or page number function is used) Reduce the number of originals to be scanned and reattempt the operation.
62 Questions for Error Messages