Connecting Ac/Dc Power; Connecting Video - Advantech PAX-332 Series User Manual

2.5

Connecting AC/DC Power

Plug the female end of the AC/DC power adapter into the DC power connector.

Plug the female end of the power cord into the AC power connector on the

adapter.
Plug the male end of the power cord into a power outlet socket.

The power cable plug may differ according to the standards of each country.

2.6

Connecting Video

Before connecting the monitor to a PC or other device, ensure all equipment is

powered off.
Connect one end of an HDMI 2.0 cable to the monitor's HDMI port and the other

end to the HDMI port of the PC or other device. A DP 1.2 cable can be con-
nected to the monitor's DP port and to the DP port of the PC or other device if
equipped with a DP input port.
Ensure that the cable is securely connected to both the monitor and the PC/

other device. Tighten the connector screws to ensure a secure connection.
The signal input source can be selected via the OSD menu. Refer to Section

3.1.9 for further details.
PAX-332-C2F-NAS (AVAS optional)
PAX-332-C2B-NAS, PAX-332-C2B-NAR (RGB optional)
PAX-332-C2A-NAS
PAX-332 User Manual 12