Interface On Avas Back Panel; Viewing Angle; Positioning - Advantech PAX-332 Series User Manual

PAX-332-C2A-NAS
1. DC switch
2. DC power input: +24V power connector
3. DVI 1 input/output
4. DP/HDMI input
5. USB up
2.2.5

Interface on AVAS Back Panel

Name
SFP+
Status LED
1GbE
Note!
If the power supply cord is unplugged from the power outlet, AVAS will
be disconnected. The power outlet socket should be located near the
equipment and easily accessible.
2.3

Viewing Angle

The PAX-332 LCD monitor can be vertically adjusted to the preferred viewing angle
for maximum comfort.
Caution! Do not force the monitor past its maximum extension in any direction as
this may damage the monitor and the monitor stand.
2.4

Positioning

Before setting up your workstation, prepare a suitable installation space. This should
be a stable, flat, dust-free surface with good surrounding ventilation. Position the
monitor screen away from direct sunlight. The glare caused by reflected sunlight may
render the screen difficult to read.
Caution!



Function
SFP+ port for SFP+ modules only
Status LED, will indicate the AVAS operational status:
a. Blinking green: operating as normal
b. Blinking orange: warning notification
c. Continuous orange: FPGA is starting up
d. Blinking red: error notification
e. Off: no power supplied to the AVAS
1GbE (RJ45) has no function yet
When positioning the equipment, ensure that the main ports and
sockets are easily accessible.
Do not place the monitor close to a heat source.
Do not place the monitor in direct sunlight or near a window.
Exposure to direct sunlight or moisture can damage the monitor.
11 PAX-332 User Manual