Table of Contents
Advertisement
Right Key
Port A Key
Port B Key
2.2.4
Input/Output Signal Ports
PAX-332-C2F-NAS (AVAS optional)
1.
DC switch
2.
DC power input: +24V power connector
3.
DC power output: +5V/+12V power connector
4.
RS-232C
5.
SDI 1 input/output
6.
S-Video input/output
7.
Video input/output
8.
DVI 2 input/output
9.
DVI 1 input/output
10.
DP/HDMI input
11.
USB up
12.
SFP+ optional
13.
Status optional
14.
LAN optional
PAX-332-C2B-NAS, PAX-332-C2B-NAR (RGB optional)
1.
DC switch
2.
DC power input: +24V power connector
3.
DC power output: +5V/+12V power connector
4.
RS-232C
5.
SDI 1 input/output
6.
S-Video input/output
7.
Video input/output
8.
DVI 2 input/output
9.
DVI 1 input/output
10.
DP/HDMI input
11.
USB up
12.
RGB input
13.
Audio input/output
PAX-332 User Manual
Move and adjust values in main OSD menu.
Used to activate Display Mode hot menu by holding the key for
longer than 3 sec. when main OSD menu is not displayed.
Wake up in DPMS mode.
PIP Main input selection function.
Only available when using the PIP function.
Used to change directly to the backup source input specified in A.
Used to display the selectable OSD menu for backup source input
A by holding the key for more than 5 sec.
Is not available when using the PIP function.
PIP Sub input selection function.
Only available when using the PIP function.
Used to change directly to the backup source input specified in B.
Used to display the selectable OSD menu for backup source input
B by holding the key for more than 5 sec.
Is not available when using the PIP function.
10
Advertisement
Table of Contents
