Safety And Maintenance - Advantech PAX-332 Series User Manual

4.6

Safety and Maintenance

Caution! To ensure optimum performance, follow the safety instructions outlined
below when setting up or using the equipment.
Do not open the monitor. There are no user-serviceable parts inside. Opening or

removing the cover may expose you to dangerous shock hazards or other risks.
Refer all servicing to qualified service personnel.
Do not spill liquid onto the equipment and do not operate the equipment near

water.
Do not insert objects of any kind into the equipment as they may touch danger-

ous voltage points, which can be harmful or fatal, or may cause electric shock,
fire, or equipment failure.
Do not place heavy objects on the power cord. Damage to the cord may cause

shock or fire.
Do not place the equipment on a sloping or unstable cart, stand, or table as it

may fall and cause serious damage.
To operate the equipment, use an AC power supply cord that complies with

international safety standards.
Do not place any objects on top of the equipment.

Do not operate the equipment outdoors.

The fluorescent tube inside the monitor contains mercury. Follow relevant local

regulations when disposing of the tube.
Do not use the equipment in very hot, humid, dusty, or oily environments.

If the monitor screen is damaged or cracked, handle with care. Do not touch the

liquid crystals.
Ensure adequate ventilation around the equipment to allow heat dissipation. Do

not block ventilated openings or place the equipment near a radiator or other
heat sources.
The power cable connector is the primary means of detaching the equipment

from the power supply. The monitor should be installed close to a power outlet
that is easily accessible.
Handle with care when transporting. Save the original packaging for moving the

equipment between locations.
Caution! If any of the conditions listed below occur, immediately unplug the moni-
tor from the power outlet and have it serviced by qualified service per-
sonnel.
The power supply cord or plug is damaged.

Liquid or objects have penetrated the monitor.

The monitor has been exposed to rain or water.

The monitor has been dropped or damaged.

The monitor does not operate normally according to the operating instructions.

PAX-332 User Manual 30