Vga Port (Db-15); Dc 12V Power In - Advantech FPM-3120TH Series User Manual

Flat panel monitor with 12" color tft/lcd display
Table of Contents

Advertisement

1.5 Connectors
The following connectors are situated on the buttom of the FPM-3120
Series:

VGA Port (DB-15)

This DB-15 connector can be connected to the system via the external
15-pin DB-15 connector locatd on the left side of the system unit.
Keyboard & mouse Connector (PS/2)
There are two PS/2 connectors which can ne connected to keyboard or
mouse.
Touchscreen Connector (DB-9) (optional)
This connector will be present only if a touchscreen is installed. It
must be connected to the RS-232 port of the PC. The touchscreen
cable is included with all orders which include the touchscreen option.

DC 12V Power In

This connector will be connected to the DC 12V Switching Power
Supply.
Extended Cable Transmission (optional)
A 5/20/30/50-meter VGA cable is provided for special applications.
Another longer cable is also available. For more detailed information,
please contact our dealers.
Warning:
Before you connect VGA cable between FPM-3120TH& PC, please
note the following issues.
1. If you have intalled operation system in the PC, make sure the
verticle frequency falls within the range. (Refer to Appendix B)
2. If you do not install operation system, you have to adjust the
verticle frequency to fall within the range.
Chapter 1 Introduction
5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fpm-3120th-tFpm-3120th-tc

Table of Contents