Positioning; Connecting Ac/Dc Power; Connecting Video - Advantech PAX-324-C2 User Manual

2.4

Positioning

Before setting up your workstation, prepare a suitable installation space. This should
be a stable, flat, dust-free surface with good surrounding ventilation. Position the
monitor screen away from direct sunlight. The glare caused by reflected sunlight may
render the onscreen difficult to read.
Caution!



2.5

Connecting AC/DC Power

Plug the female end of the AC/DC power adapter into the DC power connector.

Plug the female end of the power cord into the AC power connector on the

adapter.
Plug the male end of the power cord into a power outlet socket.

The power cable plug may differ according to the standards of each country.

2.6

Connecting Video

Before connecting the monitor to a PC or other device, ensure all equipment is

powered off.
Connect one end of an HDMI 2.0 cable to the monitor's HDMI port and the other

end to the HDMI port of the PC or other device. A DP 1.2 cable can be con-
nected to the monitor's DP port and to the DP port of the PC or other device if
equipped with a DP input port.
Ensure that the cable is securely connected to both the monitor and the PC/

other device. Tighten the connector screws to ensure a secure connection.
The signal input source can be selected via the OSD menu. Refer to Section

3.1.9 for further details.
PAX-324-C2F-HAS, PAX-324-C2F-NAS (AVAS option)

PAX-324-C2B-HAS, PAX-324-C2B-HAR, PAX-324-C2B-NAS,

PAX-324-C2B-NAS-S, PAX-324-C2B-NAR (RGB option)
PAX-324-C2B-NAS-SK, PAX-324-C2B-NAR-SK,
PAX-324-C2B-HAR-SP (Built in Speaker, RGB Option)
When positioning the equipment, ensure that the main ports and
sockets are easily accessible.
Do not place the monitor close to a heat source.
Do not place the monitor in direct sunlight or near a window.
Exposed to direct sunlight or moisture can damage the monitor.
17 PAX-324-C2 User Manual