Adjusting The Viewing Angle; Positioning; Connecting Ac Power - Advantech PAX-355-C8 Series User Manual

PAX-355-C8D-NAS, PAX-355-C8D-NAR (SDI Quad 3G Option)

(1) AC SWITCH
(2) AC POWER Input: AC Power Cord
(3) DC POWER Output: +5V/+12V Power Connector
(4) RS-232C
(5) DVI Input (Down) / Output (Up)
(6) HDMI Input (Left) / Output (Right)
(7) DP Input
(8) USB UP
(9) SDI Input / Output (Option)
1.3

Adjusting the Viewing Angle

The LCD monitor can be adjusted vertically for the user's preferable viewing angle
position.
Caution! Do not force the monitor past its maximum extension in any direction.
You could damage the monitor and the monitor stand.
1.4

Positioning

Before you set up your workstation, prepare a suitable place, which should be a sta-
ble flat dust-free surface with good ventilation. Position the screen of the monitor not
to face a window where sunlight often comes in. The glare caused by reflected sun-
light can make the image on the screen difficult to read.
Caution!



1.5

Connecting AC Power

1. Plug the female end of the power cord into the AC power connector on the mon-
itor.
2. Plug the male end of the power cord into the wall socket.
3. The plug on the power cable can be various according to the electrical standard
in each country.
PAX-355-C8 User Manual
When positioning the equipment, make sure that the main ports
and sockets are easily accessible.
Do not place the monitor close to a heat source.
Do not place the monitor in direct sunlight or near a window. When
the monitor is exposed to moisture and direct sunlight, it can be
seriously damaged.
6