Table of Contents
Advertisement
Description of the System
Centring of optics
Red-Ring Reflector (RRR)
Break Resistant Reflector (BRR)
Tooling Ball Reflector (TBR)
Reflector constant (ADM)
Red-Ring Reflector (RRR)
Break Resistant Reflector (BRR)
Tooling Ball Reflector (TBR)
If repeatability of measurements is important, the reflector
☞
should always be used with the same orientation. The serial
number and Leica logo on the reflector housing helps to main-
tain the orientation.
Value
< ±3μm
≤ ±10 μm
< ±10 μm
Value
0.000 mm ± 0.003 mm
0.00 mm ± 0.01 mm
5.30 mm ± 0.03 mm
43
Hide quick links:
Advertisement
Table of Contents
