Leica AT500 User Manual page 57

Shipping, transport
of batteries
Field adjustment
6.2
Product
Protection Cover
Li-Ion batteries
Charger and AC/DC
power supply
6.3
6.3.1
Product and
accessories
Care and Transport
When transporting or shipping batteries, the person responsible for the
product must ensure that the applicable national and international rules and
regulations are observed. Before transportation or shipping, contact your
local passenger or freight transport company.
Exposing the product to high mechanical forces, for example through fre-
quent transport or rough handling, or storing the product for a long time
may cause deviations and a decrease in the measurement accuracy. Period-
ically carry out test measurements and perform the field adjustments indic-
ated in the User Manual before using the product.
Storage
Respect the temperature limits when storing the equipment, particularly in
summer if the equipment is inside a vehicle. Refer to
information about temperature limits.
The sensor unit and its external optical parts can be protected from dust
with the Protection Cover. Use the Protection Cover whenever the Laser
Tracker is not in use.
Refer to 7 Technical Data
•
range
Remove batteries from the product and the charger before storing
•
After storage recharge batteries before using
•
Protect batteries from damp and wetness. Wet or damp batteries must
•
be dried before storing or use
A storage temperature range of 0 °C to +30 °C / +32 °F to +86 °F in
•
a dry environment is recommended to minimize self-discharging of the
battery
At the recommended storage temperature range, batteries containing
•
a 40% to 50% charge can be stored for up to one year. After this
storage period the batteries must be recharged
Keep chargers and AC/DC power supply away from excessive dirt, dust
•
and contaminants
After unpacking the product, visually inspect the charger for possible
•
damages
Unplug the product from the outlet before attempting any mainten-
•
ance or cleaning
Cleaning and Drying
General
Use only a clean, soft, lint-free cloth for cleaning. If necessary, moisten
•
the cloth with water or pure alcohol. Do not use other liquids; these
may attack the polymer components.
7 Technical Data
for information about storage temperature
for
57