Leica AT500 User Manual page 10

CAUTION
Mounting the sensor on unstable or uneven ground
This may cause the sensor to tip over or cause unreliable measurement
results.
Precautions:
▶ Ensure the ground is stable and even. Do not place the sensor over
cracks in the floor.
WARNING
Inadequate securing of the working site
This can lead to dangerous situations, for example in traffic, on building sites
and at industrial installations.
Precautions:
▶ Always ensure that the working site is adequately secured.
▶ Adhere to the regulations governing safety, accident prevention and
road traffic.
NOTICE
Risk of damage by overheating
If the product is covered by the protective cover while being switched on,
the product may be damaged by overheating.
Precautions:
▶ Ensure that the product is switched off before covering it with the
protective cover.
CAUTION
Moving the AT500 with attached cables
The Laser Tracker may tip over.
Precautions:
▶ Ensure that cables are always loose when moving the AT500 over short
distances.
▶ Disconnect the cable(s) in advance when moving the AT500 over a
distance longer than the Ethernet or/and power supply cable.
10 Safety Directions