Application Processor - Leica AT500 User Manual

2.7
Description
2.8
Description
38
Network Screen

Application Processor

An application processor which runs the actual application software is
required to operate the AT500. The Leica Metrology Foundation (LMF)
provides an open and flexible interface to third-party application programs.
The use of an Application Processor distributes the workload such as:
The system software runs on the AT500 Processor, the application
•
software runs on the Application Processor. The resources of the
Application processor are fully available for data acquisition, handling,
calculation and graphical display to support all user needs. The hard-
ware requirements for the Application Processor depend on the spe-
cifications of the supplier of the application software.
The interface between the system software and the application soft-
•
ware is clearly defined, making it easier to maintain both, embedded
and application software.
Accuracy
The accuracy of measurements with the Absolute Tracker depends on the
individual accuracy of the following components:
Description of the System