Table of Contents
Advertisement
4
4.1
General
Setup Step-by-
step
Operation
Operation
Setup
The first installation of the product should be done by authorised Hexagon
personnel. Installation by unauthorised personnel may cause damage and will
make the warranty null and void.
2
4
3
1b
1a
0024614_001
1.
Screw the Quick Release onto the Tracker Stand and tighten it
using the hinged hook wrench.
☞
2.
Ensure that the locking lever of the Quick Release is
in unlocked position.
Set the AT500 instrument onto the Quick Release.
☞
3.
Do not remove the locking lever of the Quick
Release while the sensor is attached to the Quick
Release.
Close the locking lever to lock the Absolute Tracker on the Quick
Release.
4.
Connect the external temperature sensor to the connector of the
socket, that is labelled with "Air". This ensures that you achieve
the highest possible measurement accuracy.
5.
Connect a LAN cable (if applicable).
6.
Connect the AC power supply to the connector on the socket and
to a grounded mains socket outlet.
7.
To turn on the Absolute Tracker, press the power switch on the
frontpanel of the side cover.
8.
The system automatically detects when the start-up cycle has fin-
ished. The system will initialise automatically once the start-up
cycle has finished.
9.
Start the application.
47
Hide quick links:
Advertisement
Table of Contents
