Leica AT500 User Manual page 18

1.6.3
General
18
built into this product produces a visible laser beam which emerges from the
telescope objective.
The laser product described in this section is classified as laser class 2 in
accordance with:
IEC 60825-1 (2014-05): "Safety of laser products"
•
These products are safe for momentary exposures but can be hazardous for
deliberate staring into the beam. The beam may cause dazzle, flash-blind-
ness and after-images, particularly under low ambient light conditions.
ADM:
Description
Emission wavelength
Maximum average radiant power
Beam divergence (full angle)
Laser Pointer:
Description
Emission wavelength
Maximum average radiant power
Beam divergence (full angle)
24800_001
Automatic Target Recognition
The Automatic Target Recognition built into the product produces an invisible
laser beam which emerges from the telescope objective.
The laser product described in this section is classified as laser class 1 in
accordance with:
IEC 60825-1 (2014-05): "Safety of laser products"
•
These products are safe under reasonably foreseeable conditions of opera-
tion and are not harmful to the eyes provided that the products are used
and maintained in accordance with this user manual.
Value
795 nm
(range 785 nm-800 nm)
< 0.35 mW cw
0.1 mrad
Value
640 nm
0.35 mW cw
0.2 mrad
a, b
a Laser beam ADM
b Laser beam laser pointer
Safety Directions