Leica AT500 User Manual page 14

CAUTION
Unsuitable installation location
Installing near mechanically moving machine components may damage the
product.
Precautions:
▶ Deflect the mechanically moving machine components as far as pos-
sible and define a safe installation zone.
WARNING
If the product is improperly disposed of, the following can happen:
If polymer parts are burnt, poisonous gases are produced which may
•
impair health.
If batteries are damaged or are heated strongly, they can explode and
•
cause poisoning, burning, corrosion or environmental contamination.
By disposing of the product irresponsibly you may enable unauthorised
•
persons to use it in contravention of the regulations, exposing them-
selves and third parties to the risk of severe injury and rendering the
environment liable to contamination.
The product includes parts of Beryllium inside. Any modification of
•
some internal parts can release dust or fragments, creating health haz-
ard.
Precautions:
▶
Product-specific treatment and waste management information can be
received from your Leica Geosystems distributor.
☞
14
The product must not be disposed with household
waste.
Dispose of the product appropriately in accordance
with the national regulations in force in your country.
Always prevent access to the product by unauthorised
personnel.
Applies only for California. The product contains CR Lithium
Cell(s) with perchlorate material inside – special handling may
apply.
Refer to Department of Toxic Substances Control - Perchlorate
for more details.
Safety Directions