Leica AT500 User Manual page 17

Labelling
☞
1.6.2
General
Safety Directions
CAUTION
Class 2 laser product
From a safety perspective, class 2 laser products are not inherently safe for
the eyes.
Precautions:
▶ Avoid staring into the beam or viewing it through optical instruments.
▶ Avoid pointing the beam at other people or at animals.
24799_001
Contains Transmitter Module
FCC ID: 2AJY6MORIN01
FCC ID: SQGBL654
IC: 22172-MORIN01
IC 3147A-BL654
R 204-760001
R 201-180112
Importer: Hexagon Metrology Ltd
Metrology House, Halesfield 13
Telford, Shropshire, TF7 4PL
24609_001
The AT500 is classified as a laser class 2 system although some individual
laser sources are classified differently. The possibility of simultaneous emis-
sion of the individual laser sources results in an overall classification as laser
class 2.
Absolute Distance Meter (ADM) and Laser Pointer
The Absolute Distance Meter built into this product produces an invisible
laser beam which emerges from the telescope objective. The laser pointer
Model: AT500 Art.No.:
577440
Power: 30-48V / 4A max.
Leica Geosystems AG
S.No.:
CH-9435 Heerbrugg
393403
Manufactured: 01.2022
Made in Switzerland
Standard applied: IEC 60825-1:2014 visible invisible invisible
Maximum average radiant power 0.35 mW 0.5 mW 1.5 mW
Emitted wavelenght 635 nm 795 nm 905 nm
Pulse duration cw cw 1.5ms
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC
60825-1 Ed. 3., as described in Laser Notice No. 56, dated May 8, 2019.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
17