Introduction; Packing; Technical Description; Specifications - Labnet 222DS Instruction Manual

1.0 Introduction

The 222DS Benchtop Shaking Incubator is a combination product of a shaker and a temperature
chamber, designed for shaking and heat treatment of sensitive samples. It replaces two devices, reduces
time and space needed. It is very suitable for biochemistry, microbiology and medicine laboratories in
which thermal and shaking treatment of samples is a daily used routine.

2.0 Packing

The 222DS Benchtop Shaking Incubator includes the following components:
222DS Benchtop Shaking Incubator
Instruction Manual

3.0 Technical Description

The casing of Benchtop Shaking Incubator is made of steel plate, varnished with high resistant
polyurethane lacquer. Temperature chamber lid is made of PMMA, which is resistant to the temperatures
up to 90°C.
Basic equipment consists of independent shaking device and temperature chamber. Both sections are
driven and regulated via microcontroller driven electronics, which also controls all necessary sensors for
motor speed, temperature, lid, temperature safety fuse, time and self-diagnostics error levels in variety
of margin situations.

3.1. Specifications

Heater Power
Fan Power
Shaking Motor Power
Fuse
Environmental Temperature
Relative Humidity
Speed RPM Regulation
Shaking Orbit
Temperature Operating Range 5°C above room temperature to 70°C
Temperature Sensor
Temperature Accuracy
Temperature Stability
Timer
Capacity
Dimensions (W x D x H)
Weight
Overvoltage Category
700W
17W
35W
2 x 5A 250V
2 x 10A 115V
5°C to 40°C
Up to 85% non-condensing
Digital load independent, from 20 to 300 rpm in 1 rpm steps
19 mm
PT100
±0.5°C
±0.5°C
1 min to 99 hours, timer HOLD function
16 x 125 mL , 9 x 250 mL, 5 x 500 mL, 4 x 1,000 mL
15 x 21 x 16 in. (37 x 53 x 40 cm)
45 lbs. (20.2 kg)
Installation category 1
Instruction Manual | 1