Create And Deploy On Kvm - Oracle Netra Server X5-2 Installation Manual

b.
c.
d.
e.
f.
g.
h.
If your hypervisor randomly allocates addresses for network interfaces, the interface
order at the hypervisor does not necessarily match that at the OCSBC. You can use the
interface-mapping show command to determine the MAC address to interface order,
and if necessary, adjust it using the interface-mapping swap command.
If you want to increase the default disk size, click the Disks tab and the pencil icon to set
13.
a larger disk size.
Do not decrease disk size.
Click the Boot Order tab and ensure that Disk is the first (or only) option in the boot order
14.
list.
Click OK.
15.
The system applies your settings to your VM.
Click the Console icon from the menu bar.
16.
Oracle VM Manager displays a terminal screen with the serial CLI operational.
Highlight the target and click the Start button.
17.
Oracle VM Manager starts your VM, displaying the startup sequence and, ultimately,
providing ACLI access in the console.

Create and Deploy on KVM

For complete KVM documentation, refer to http://www.linux-kvm.org/page/Documents.
Install the Virtualization Host group and virt-install.
1.
# yum groupinstall "Virtualization Host"
# yum install virt-install
Extract the image.
2.
# tar xvf nnSCZ739.64-img-vm_kvm.tar
nnSCZ739.64-img-vm_kvm.ovf
nnSCZ739.64-img-vm_kvm.qcow2
legal.txt
Use virt-manager to create the management and media network interfaces.
3.
•
•
wancom1
wancom2
spare
s0p0
s1p0
s0p1
s1p1
Create a virtual bridged network for management interfaces.
Create virtual networks for media interfaces.
Chapter 6
Create and Deploy on KVM
6-3