Oracle Netra Server X5-2 Installation Manual page 78

Navigate to the My AMIs link to choose the image for your instance, and click
4.
Select.
Chose the desired instance type. See your software version's release notes for
5.
tables of supported machine sizing.
Click Next: Configure Instance Details. The AWS instance deployment
6.
sequence displays the Configure Instance Details dialog.
Configure the following instance details; leave the others at their defaults:
7.
Specify the number of Instances. (Specify 2 for an HA setup.)
a.
Select the correct Network for wancom0.
b.
Select the correct Subnet for wancom0.
c.
Establish a public IP for wancom0, either by using the Auto assign Public IP
d.
control or by configuring an elastic IP after deployment.
HA only—Check Placement Group. Ensure the group is of type Spread, and
e.
that both OCSBCs reside in the same group.
HA only—Select the appropriate IAM role. (Choose the IAM role you
f.
configured above.)
Scroll down to the Network interfaces configuration fields.
g.
Ensure you are configuring the Device named eth0.
h.
Select New network interface from the Network Interface dropdown list for
i.
wancom0.
Select the correct Subnet from the dropdown list for wancom0.
j.
Ensure the Primary IP field is set to Auto-assign.
k.
Scroll to the bottom of the Configure Instance Details dialog and click Next: Add
8.
Storage.
Choose your desired OCSBC storage size in GB. The default storage size is
9.
40GB.
Click Next: Add Tags.
10.
Enter any arbitrary name to identify the instance. Ensure the name allows you to
11.
uniquely identify this instance during later deployment procedures and operation.
Click Next: Configure Security Group.
12.
You can either create a new security group or select an existing security group to
13.
set appropriate firewall rules. Refer to EC2 documentation for configuration
instructions.
Click the Review and Launch button. EC2 displays a summary of your instance.
14.
Review the Instance configuration and click the Launch button.
15.
From the pop-up screen, select an existing SSH key pair or create a new key pair
16.
and check the acknowledgment check-box.
If you create a new key pair, enter a name and click Download Key Pair.
a.
Move the PEM file to your .ssh directory.
b.
Create and Deploy OCSBC Instances on EC2
Chapter 7
7-12