Oracle Netra Server X5-2 Installation Manual page 59

On the Disk Format screen, select Thick Provisioned Lazy Zeroed, and click Next.
8.
On the Network Mapping screen, map the networks used in this template to
9.
networks in your inventory, and click Next.
The OCSBC enumerates and binds network interfaces in the order presented by
the hypervisor to the virtual machine. If 3 or less interfaces are presented, the bind
order is wancom0, s0p0, s1p0. If more than 3 interfaces are presented, the bind
order is:
wancom0
a.
wancom1
b.
wancom2
c.
spare
d.
s0p0
e.
s1p0
f.
s0p1
g.
s1p1
h.
If your hypervisor randomly allocates addresses for network interfaces, the
interface order at the hypervisor does not necessarily match that at the OCSBC.
You can use the interface-mapping show command to determine the MAC
address to interface order, and if necessary, adjust it using the interface-mapping
swap command.
On the properties screen, enter parameters per your configuration, and click Next.
10.
Figure 6-1 Properties Dialog for OVF Deployment
Chapter 6
Create and Deploy on VMware®
6-6