Internet Services; Compliance; Connector Specifications - Javad HPT404BT Operator's Manual

Specifications

Internet Services

2. Internet Services
Parameter
TCP server
TCP Client
NTRIP Client Connects to the specified NTRIP caster and Mount point, downloads data from NTRIP

3. Compliance

FCC
Industry Canada
R&TTE

4. Connector Specifications

DB15 Connector
This provides DB15 connectivity for the HPT404BT with a DB9 for connection to a PC/CE Device for
configuration.
This connector provides DB15 connectivity for the HPT404BT with DTE. About using and configuration
RS-485 please contact JAVAD GNSS support.
Number
1 DCD_OUT
2 DTR_OUT
46
Runs a TCP server on the specified port of the hostname/IP provided by cellular network
operator, accepts the connection from authorized TCP client, and uploads data receiving
from RF interface (from a UHF transmitter) or communication ports (UART, USB or
Bluetooth) to the connected TCP client.
TCP server provides the authorized TCP client by Remote CLI feature also.
Connects to the specified TCP server, downloads data from it, modulates with supported
modulation types and transmits at RF output power levels from 15 dBm up to 36 dBm
operating in UHF frequency band (406 to 470 MHz). The downloaded data can be routed
to the UART, USB or Bluetooth communication ports also.
caster and routes it as for TCP client service described above. The NTRIP client is also
able to take NMEA GGA messages from UART, USB or Bluetooth communication ports
and upload it to the NTRIP caster.
Parameter
Figure 1. DB15 Connector
Table 5. DB15 Connector Specifications
Signal Name Dir
O Data Carrier Detect (RS-232)
O Data Terminal Ready (RS-232)
Specification
Specification
Part 90
RSS-119
ETSI EN 300 113-2; ETSI EN 301 489-5;
EN 60950-1:2006
Details
www.javad.com