Javad HPT404BT Operator's Manual page 40

Command Line Interface
RTN
MPOINT
NMEA
LOGIN
PASSWORD
TRANSPORT
STATE
40
Sets/gets the string type value representing the Mount point for NTRIP client to connect.
This parameter is not applicable for TCP client/server services. To set this parameter the
NTRIP client should be selected as an active RTN service by RTN TYPE command.
<value> – string (length < 64 bytes).
Example: next command sets the Mount point for NTRIP client to connect:
RTN MPOINT AUT10
The next commands gets the Mount point of NTRIP client:
RTN MPOINT
AUT10
@00
Sets/gets the string type value representing predefined NMEA GGA message to use in
NTRIP client service. This parameter is not applicable for TCP client/server services. To
set this parameter the NTRIP client should be selected as an active RTN service by RTN
TYPE command.
<value> – string (length < 128 bytes).
If the value represents any string different from NONE the authorized NTRIP client uses
this predefined message and sends it to NTRIP caster once a second.
If the value is set to NONE the NTRIP client does not send predefined NMEA GGA
message to NTRIP caster.
Example: next command sets/defines the NMEA GGA message for NTRIP client:
RTN NMEA 1234567890
The next command gets the currently set NMEA parameter of NTRIP client:
RTN NMEA
1234567890
@00
Sets/gets the string type value representing the login (user name) of the active RTN
service. For TCP/NTRIP clients this parameter is used to pass authorization on the
remote machine. For TCP server this parameter is used to identify the authorized TCP
clients.
<value> - string (length < 64 bytes).
Example: next command sets the login of the active RTN service to "user"
RTN LOGIN user
Next command gets the currently set login of the active RTN service:
RTN LOGIN
user
@00
Sets/gets the string type value representing the password of the active RTN service. For
TCP/NTRIP clients this parameter is used to pass authorization on the remote machine.
For TCP server this parameter is used to identify the authorized TCP clients.
<value> - string (length < 64 bytes).
Example: next command sets the password of the active RTN service to "pswd"
RTN PASSWORD pswd
Next command gets the currently set password of the active RTN service:
RTN PASSWORD
pswd
@00
Gets the transport of the RTN service used to access the internet. This parameter is read
only and returns GPRS.
Example: next command gets the transport of RTN services
RTN TRANSPORT
GPRS
@00
Gets the state of active RTN service. This parameter is used for monitoring purposes.
Example: next command is used to get the state of active RTN service
RTN STATE
Authenticated
@00
www.javad.com