Javad HPT404BT Operator's Manual page 30
With gsm
Hide thumbs
Also See for HPT404BT:
- Operator's manual (44 pages) ,
- User manual (23 pages) ,
- Configuration example (7 pages)
Table of Contents
Advertisement
Internet services
NTRIP client
Now to stop the running NTRIP client service, the unit should be switched to command mode
and "RTN CONNECT 0" command should be issued. The successful execution of this command
reports the following progress and result:
RTN CONNECT 0
Disconnecting..........
Disconnected
@00
Note:
If no data received from NTRIP caster during 30 seconds the authorized NTRIP client disconnects from
its caster and starts reconnecting process.
Note:
The IP address, host port, user name and login parameters in the examples above are invented. These
parameters should be taken from RTN provider.
Note:
In the examples above it is assumed that the GPRS Access point name, login and password are already
configured.
30
www.javad.com
Advertisement
Table of Contents
Need help?
Do you have a question about the HPT404BT and is the answer not in the manual?