Table of Contents
Advertisement
Quick Links
TRE Evaluation Кit
Application Notes
Version 1.0
Last Revised May 7, 2021
All contents in this manual are copyrighted by JAVAD GNSS.
All rights reserved. The information contained herein may not be used, accessed, copied,
stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express
written consent from JAVAD GNSS.
Advertisement
Table of Contents
Related Manuals for Javad TRE
Summary of Contents for Javad TRE
- Page 1 Version 1.0 Last Revised May 7, 2021 All contents in this manual are copyrighted by JAVAD GNSS. All rights reserved. The information contained herein may not be used, accessed, copied, stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express...
- Page 2 © JAVAD GNSS Inc., 2021 www.javad.com...
-
Page 3: Terms And Conditions
(“JAVAD GNSS”) for owners of JAVAD GNSS products. KIT. SUCH DISCLAIMED DAMAGES INCLUDE BUT ARE It is designed to assist owners with the use of TRE/ NOT LIMITED TO LOSS OF TIME, LOSS OR DESTRUCTION TR/TRH-G2/TRH-G2 Evaluation Kit and its use is sub- OF DATA, LOSS OF PROFIT, SAVINGS OR REVENUE, ject to these terms and conditions (the “Terms and... -
Page 4: Weee Directive
JAVAD GNSS modifies these Terms and Conditions (including the Software license, warranty and limitation of liability). SAFETY – Improper use of the TRE Evaluation Kit can lead to injury to persons or property and/or malfunc- tion of the product. The TRE/TR Evaluation Kit should only be repaired by authorized JAVAD GNSS warran- ty service centers. -
Page 5: Gnss Antenna Connection
Kit packaging Connection The TRE Evaluation Kit provides an easy connection to OEM board connection any of JAVAD GNSS OEM receiver boards. It is designed for use in laboratories and allows: The OEM board of TRE series connected directly to •... -
Page 6: Serial Rs-232 Connection
Shield shell shell Shield Signal Name Wire Name Number The Serial RS-232 Null-Modem cable should be wired Pair 1: Wire 1 according to the wiring table below. TXD+ Pair 2: Wire 1 RXD+ TXD- Pair 2: Wire 2 RXD- www.javad.com... -
Page 7: Ethernet Connection
Pair 2: White/Orange RX+ (BI_DB+) USB type Mini-AB Female connector on Evaluation Kit TX- (BI_DA-) Pair 2: Orange RX- (BI_DB-) board. RX+ (BI_DB+) Pair 3: White/Green TX+ (BI_DA+) For best results, we recommend to use as short as pos- www.javad.com... -
Page 8: Can Connection
1 %%set,net/tcpcl/rcv/ Signal Pair Number: Wire Signal Name addr,192.168.0.1 Name Number %%set,net/tcpcl/rcv/port,8002 %%set,net/tcpcl/rcv/login,d CAN_L Pair 1: Wire 1 CAN_L %%set,net/tcpcl/rcv/passwd,a CAN_GND Pair 2: Wire 1 CAN_GND %%set,dev/tcpcl/a/imode,rtcm %%set,net/tcpcl/mode,rcv TXD+ %%set,pos/mode/cur,pd TXD- For OEM receiver Ethernet port connection with LAN, www.javad.com... - Page 9 Additionally, CAN ports messages identifiers should be configured in both OEM receivers, so each receiver will accept messages transmitted only by its partner. Example: Two receivers connected together through their CAN A ports. Receiver 1 settings: %%set,dev/can/a/sid/in/first,0x710 %%set,dev/can/a/sid/out/first,0x700 Receiver 2 settings: %%set,dev/can/a/sid/in/first,0x700 %%set,dev/can/a/sid/out/first,0x710 www.javad.com...
-
Page 10: Safety Warnings
CAUTION: If the voltage supplied is below the minimum specifi- • Unplug this apparatus during lightning storms or cation, the TRE/TR Evaluation Kit will suspend operation. If the voltage supplied is above the maximum specification, the TRE/ when unused for long periods of time. -
Page 11: Usage Warnings
Inform JAVAD GNSS immediately if this prod- uct does not function properly. Only allow authorized JAVAD GNSS warranty service centers to service or re- pair this product. Do not connect or disconnect equipment with... - Page 12 900 Rock Avenue, San Jose, CA 95131, USA Phone: +1(408)770-1770 Fax : +1(408)770-1799 www.javad.com All rights reserved © JAVAD GNSS, Inc., 2021...
Need help?
Do you have a question about the TRE and is the answer not in the manual?
Questions and answers