Installing Modemvu; Connecting Hpt404Bt And Computer - Javad HPT404BT Operator's Manual

Configuration

Installing ModemVU

4. Installing ModemVU
TM
ModemVU is a Windows® application is a configuration program for the radio modem. ModemVU is
available from the JAVAD GNSS website.
Note:
Refer to the ModemVU Software Manual for full details on installing and using ModemVU Software.
ModemVU is JAVAD GNSS's configuration utility for external modems and modems embedded in
JAVAD GNSS modems. ModemVU provides the following functions:
• Connecting a computer to an UHF modem via a serial port.
• Displaying information about the radio modem installed in the modem.
• Programming the radio modem's settings.
• Loading the new modem firmware.
To configure the HPT404BT modem, have the following ready:
• Computer running Windows®;
• ModemVU Software installed on the computer;
• A serial cable.
1. If downloading the program from the website, extract the program files into a folder on your hard
drive.
2. Navigate to the location of the ModemVU program and double-click the Setup.exe icon.
3. Follow the on-screen installation instructions. Click Next to continue, Back to get back to previous
step, or Cancel to quit the installation.
4. Keep the default installation location or select a new location.
5. Click Finish to complete the installation.
6. If desired, create a shortcut on the computer's desktop for quick access to ModemVU.
To uninstall ModemVU use the Start menu on your computer:
1. Navigate to the location of the ModemVU program and double-click the Setup.exe icon.
2. Follow the on-screen installation instructions.

5. Connecting HPT404BT and Computer

Once you have established a connection between the modem and the computer, you will be able to:
• Configure the modem and its components
• Send commands to the modem
Use ModemVU to load new firmware to the modem.
16 www.javad.com