Javad HPT404BT Configuration Example

With gsm

Hide thumbs Also See for HPT404BT:

Download this manual

HPT404BT with GSM

Configuration Example

Version 1.0

Last revised March 5, 2013

All contents in this manual are copyrighted by JAVAD GNSS.

stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express written

consent from JAVAD GNSS

Page 1 Version 1.0 Last revised March 5, 2013 All contents in this manual are copyrighted by JAVAD GNSS. All rights reserved.The information contained herein may not be used, accessed, copied, stored, displayed, sold, modified, published, or distributed, or otherwise reproduced without express written...
Page 3 WITH ONFIGURATION XAMPLE 1. Ensure the SIM-card is installed in HPT404BT with GSM. 2. Connect the modem to PC, power it. 3. Start ModemVU, select HPT402/ 404BT / 404BT GSM and click Ok. 4. Select the COM port the modem is connected to and click Connect.
Page 4 HPT404BT with GSM Configuration Example 6. Set the Mode to ON and click Apply. The progress bar appear. Wait the process will be complete. 7. After the modem has been successfully registered in the GSM network, in the RSSI field the signal level appears.
Page 5 HPT404BT with GSM Configuration Example 8. Open the RTN tab. Select the type of connection in the Type drop-down list box and enter addi- tional parameters. Select Connect for Mode and click Apply. 9. The progress bar appear. Wait the process will be complete.
Page 6 HPT404BT with GSM Configuration Example 11. In the Interface tab select Route and click Apply. 12. To switch off this mode, follow the steps: • In the RTN tab the Mode switch to Disconnect and click Apply; • In the GSM tab set the Mode to OFF and click Apply.