Mport; Special Commands; Boot; Help - Javad HPT404BT Operator's Manual

Command Line Interface

Special Commands

ROUTE = 1

3.2. MPORT

The MPORT is an object that is responsible for maintenance serial port interface configuration such as
data rate.
MPORT [Parameter Name] [Parameters List] [/?]
4. Special Commands

4.1. BOOT

The BOOT command is intended to reboot the unit using selected user settings.

4.2. HELP

The HELP command types the list of all available commands:
HELP - Display this usage
XMOD - Activate X-Modem Protocol
BOOT - Reboot the unit
LINK - Set RF Link Operation Mode
DPORT - Set Data Port Configuration
MPORT - Set Maintenance Port Configuration
ALARM - Alarm Indication and Alarm Control Configuration
SLEEP - Set Sleep Mode Configuration
STATE - Display Status and Statistics
SAVE - Save Current Configuration into Configuration File
INFO - Display Product ID along with Hardware/Software Versions
ATI - Display Product ID along with Hardware/Software Versions
MAP - Operates with Channel Map
36
Parameter Name
RATE 0 – Auto.
1 – 1200 baud
2 – 2400 baud
3 – 4800 baud
4 – 9600 baud
5 – 14400 baud
6 – 19200 baud
7 – 38400 baud
8 – 57600 baud
9 – 115200 baud, a default setting
Parameter List
www.javad.com